With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.

The large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter.

This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style.

With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover.

As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. 

Midrange Drivers

The Oberon 7 Floorstanders feature two 7 inch diameter low loss woofers, producing optimised sound with a new wood fibre structure cone, to deliver a delicate midrange response and bass frequencies. Constructed from paper pulp reinforced with wood fibres, the cone is stiff, yet lightweight, allowing for subtle control. The cone is capable of reproducing all the micro details in the sound, for a high accuracy, unfiltered performance. The Oberon 7 contains the larger than standard 7 inch driver to allow for a lower voice coil excursion with the same pressure level, leading to an effortless reproduction of musical dynamics.

SMC Technology

The SMC technology used in the Dali Oberon 7 speakers reduces mechanical distortion often produced by hysteresis and eddy currents. The magnet motor improvements result in less third order distortion, meaning long listening pleasure with a relaxed midrange and a higher detailed performance. The magnet motor itself is constructed from an iron pole piece topped with a 10mm SMC disk, to minimise the negative effects of the iron, and putting the SMC disk in the main working area of the voice coil. Maximum effect is extracted from the SMC in this position for a greatly improved constant flux field.

Tweeter

Alongside the two midrange drivers, an ultra-lightweight 29mm tweeter is used on the Oberon 7 speakers. Developed specifically for the Oberon series, the oversized tweeter has a membrane inspired by ultra-light wave weave fabric, optimised for a larger bandwidth in the lower frequencies. The crossover between the woofer and the tweeter is then well balanced and coherent, with a clear midrange. The tweeter is able to produce wide dispersion thanks to a carefully designed front plate with similar geometry to the Rubicon and Opticon series.

Cabinet

The Oberon 7 Floorstanders are constructed from high density CNC machined MDF, with rigid construction and solid bracings inside the cabinet for reinforcement. Resonance within the cabinet is virtually eliminated thanks to the stiffness of materials. The bass ports of the speakers are fitted at the rear, allowing you to place the speakers nearer the wall for increased bass response. The front grille design for the Oberon series is completely new, featuring rounded corners and a textured fabric for a lighter, contemporary look. ‘Mountain Grey’ grilles are supplied with the White and Light Oak finishes, while the Black Ash and Dark Walnut use ‘Shadow Black’ grilles. A ‘Marshmallow White’ grille is also available for an all-white look.

Key features:

Dali Oberon 7 Floorstanding Speakers featuring two 7 inch Midrange/Bass drivers and a 29mm ultra-lightweight tweeter

Larger 7 inch wood-fibre reinforced woofers produce a detailed and dynamic performance

SMC technology eliminates mechanical distortion and improves flux field

29mm tweeter uses ultra-lightweight membrane, and is optimised for lower frequencies with a smoother crossover

Cabinet constructed from high density MDF with internal bracing

New designed grilles in complimentary colours to cabinet finishes