The Radius 380’s twin side-firing 8" C-CAM drivers - one active and one passive ABR - work in tandem with a powerful 140 W cool-running Class D amplifier (double the power of its predecessor). The drivers have no grilles but are colour-coded to coordinate with cabinet finish. A 12 V trigger syncs the 380 with other AV components when the system is activated.

Technology

18 mm MDF cabinet construction with internal bracing

Cool-running 140 W Class D amplifier with switch mode power supply (SMPSU)

Twin side-firing 8" C-CAM drivers - one active and one passive ABR

Low pass filter switch – for LFE or Stereo input selection

Power switch with ON – Auto- Off/ trigger settings

Stereo/ LFE RCA inputs

3 x Pre-set EQ settings – Music/Movie/Impact

System Format

Active sub-woofer system – Auxiliary (ABR) loading. 18 mm MDF cabinet

Lower Frequency Limit

30 Hz (- 6 dB)

Upper Frequency Limit

Variable 40 – 120 Hz @ 24 dB/Octave

Amplifier Output

140 W @ 1% THD+N

Amplifier Classification

Class D amplifier with Switch mode power supply (SMPSU)

Bass EQ Profiles

Music / Movie / Impact

Phase Control

0 & 180 degrees

Auto Sensing

Line Level >3.5mV

Input Level Requirements

Standby after approximately 15 minutes if no signal sensed

Drive Unit Complement

1 x 8” (200 mm) C-CAM long throw driver 1 x 8” (200 mm) ABR

Input Impedance

> 20 ohms

Mains Input Voltage

AC 110 - 120 V ~ 50/60Hz;  AC 220 - 240 V ~ 50/60Hz (Factory Region Preset)

Dimensions (Including Amp and Feet (H x W x D))

308 x 290 x 305 mm (121/8 x 117/16 x 12")

Connection

Stereo RCA in, LFE in, 12v Trigger in  (3.5 mm mono mini-jack)

Trigger Input

5 - 12v via 3.5 mm mono mini-jack socket

Power Consumption

200 W / 0.5 W in Standby  (ErP approved)

Weight (unpacked)

10.16 kg (22 lb 6 oz)

Sold As

Single Unit